Siemens hipath 1100 Service Manual page 181

For internal distribution only
TAC Smart - Telephony Advanced Control (Optional Software)
This application can be used with the HiPath1130/1150/1190 systems to help identify
and display all information about a specific call. It delivers key telephony functions to
the user's PC, including extension status monitoring, speed dialing capability, list of
calls made and calls received, contacts, all the while making calls automatically to a
preset list of numbers.
This software integrates with other systems to display pop-up screens and send data
to existing applications.
CallReport (optional software)
CallReport is a billing system that allows you to record information about calls origi-
nated or received by your PABX system.
CallReport runs on a regular PC under a Windows 95 / 98 /NT 4.0 / 2000 / XP environ-
ment. It receives data sent by the PABX that are then processed and stored in a PC
hard disk and identified by extension, time, call duration, trunk, outgoing route and
call cost. Based on this data the software can generate reports including total costs
per extension, sector, group, in addition to traffic reports for both outgoing and in-
coming calls.
All information is defined in the CallReport database and can be handled by any user
logged in as Administrator.
VMIe Protocol (Voice Mail Interface - extended)
Voice Mail with analog connections require the VMIe protocol. Voice Mail communi-
cation takes place via DTMF signals that contain the following information:
Type of Call (TOC)
Required item
1
Fixed size: 4 characters
Format: "***n" (n = code in table below)
Code Type of Call
1 Internal call to the Voice Mail System
3 Call Forwarding (*11)
5 Not used
7 Not used
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
Starting the Programming Mode
Code Type of Call
2 Not used
4 Second Attendant (*14)
6 Not used
8 Not used
Operation
6-29