Motorola MOTOROKR T3 Quick Start Manual

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new MOTOROKR
Bluetooth ® Wireless Music and Handsfree Car Speaker.
Front View
Microphone
Visor Clip
Speaker Call
Volume Up
Button
Button
Step C - SET YOUR DEVICE TO LOOK FOR
Motorola, Inc.
YOUR MOTOROKR T3
Consumer Advocacy Office
1307 East Algonquin Road While the MOTOROKR T3 is in pairing mode,
Schaumburg, IL 60196
use your phone or music device to perform a
device discovery. Refer to your device's manual
www.hellomoto.com
for detailed instructions on accessing Bluetooth
1-877-MOTOBLU
and putting it in device discovery mode.
1-888-390-6456 (TTY/TDD United States for
hearing impaired) For most Motorola phones:
Menu > Settings > Connection >
1 Press ( )
M
Guide Number: 6809503A46-O
Bluetooth Link > Handsfree > Look for Devices.
Bluetooth ID: xxxxxx
The phone lists Bluetooth devices it finds.
2
Select Motorola T3.
3 Select OK or Yes to pair your MOTOROKR
MOTOROLA and the Stylized M Logo are registered in the US
T3 with your phone.
Patent & Trademark Office. The use of wireless devices and their
4
Enter the passkey:
0000
accessories may be prohibited or restricted in certain areas.
5
Always obey the laws and regulations on the use of these Select OK.
products. The Bluetooth trademarks are owned by their
Note: These steps are for most Motorola phones.
proprietor and used by Motorola, Inc. under license. All other
For other phones, see your phone's user's guide.
product or service names are the property of their respective
When your MOTOROKR T3 successfully pairs
owners.
and connects with your phone or music
device, the main indicator light flashes purple
© Motorola, Inc. 2007.
and blue.
BEFORE YOU BEGIN
™ T3
To get started, your MOTOROKR T3 must be
set up with initial configuration settings.
1
Rear View
Bezel
Indicator Light
2
Play/Pause
Main
Radio Charging Power
Button
Volume Down
Indicator
Button Port Button
Button
Light
START HERE >
TEST AND USE
3
Your MOTOROKR T3 and phone or music device
are now paired and connected. Do the following
to verify proper operation:
To verify handsfree calling operation,
●
dial the number you want to call on the
phone and press SEND key on your
phone. If your phone and MOTOROKR T3
are successfully paired, you will hear
ringing on your T3.
To verify streaming audio listening
●
operation, play music on your streaming
music device. If your music source and
MOTOROKR T3 are successfully paired
and connected for streaming music, you
hear music on your T3.
1
SET UP
Your MOTOROKR T3
3
Select whether to enable/disable the
auto caller ID feature:
Press and hold Power button to enter
a
Press Volume buttons to select enable
setup mode. You hear a voice prompt to
or disable.
select appropriate language for
remaining voice prompts.
b
Press Play/Pause button to confirm
selection. You hear a confirmation
Select language for voice prompts as
tone.
follows:
4
a Press Play/Pause button again to complete
Press Volume buttons to change
setup. You hear a confirmation tone.
current selection.
b When setup is complete, you hear the voice
Press Play/Pause button to make
prompt "Setup is complete. Device is ready. "
selection. You hear a confirmation
tone.
After a few moments, your MOTOROKR T3
enters Bluetooth pairing mode.
CHECKING BATTERY LEVEL
YOU'RE FINISHED!
To check your T3's battery charge level while
turned on and not on a call, you can by
After you have successfully set up your
pressing and holding both Volume buttons
MOTOROKR T3, you don't need to repeat
until you hear a beep (about 5 seconds) The
these steps.
main indicator light displays charge status
for a few seconds (see "Indicator Light" on
For daily use, ensure that your T3 is turned ON
reverse side for details).
and your phone and/or music device's
Bluetooth feature is ON.
To charge your T3, see "Charging Battery"
on the reverse side for details.
To modify T3 configuration settings, you can
reenter setup mode by pressing and holding
the Power and Call buttons when powering
up.
To use the T3 with your FM car radio, see
"Using With Your FM Car Radio" on the
reverse side.
2
PAIR
Step B - TURN ON BLUETOOTH FEATURE
Your MOTOROKR T3 and
ON YOUR DEVICE
Bluetooth Device
To use your MOTOROKR T3, you must turn on
Before you can use your MOTOROKR T3, you
the Bluetooth feature in your phone or music
must pair (link) it with your phone and/or music
device.
device.
For most Motorola phones:
Step A - ENSURE MOTOROKR T3 IS IN
PAIRING MODE 1 Menu > Settings > Connection >
Press M ( )
Bluetooth Link > Setup.
When setup is complete (step 1), your
MOTOROKR T3 is automatically placed in
2
Bluetooth pairing mode. The main indicator light Scroll to Power.
will be steadily lit in blue to indicate handsfree
speaker is in pairing mode. 3
Select Change.
Main Indicator Light
4 Scroll to On.
(steadily blue
for pairing mode)
5 Press to turn on the Bluetooth
Select
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
If the handsfree speaker is not pairing mode,
see TROUBLESHOOTING for help.
TROUBLESHOOTING
USING YOUR
My MOTOROKR T3 will not enter pairing mode.
MOTOROKR Make sure that any devices previously paired with
the T3 are turned off. If the main indicator light is
T3
pulsing in blue, first turn off the other device, then
turn your T3 off and on. The main indicator light
becomes steadily lit in blue indicating the T3 is
See
now in pairing mode.
Features and
My phone/music device doesn't find my
Functions Guide
MOTOROKR T3.
on the reverse side
Make sure the indicator light on your T3 is on (lit in
for information on
blue) and steady when your phone/music device is
using your T3
searching for devices (see step 2a).
My MOTOROKR T3 worked before but now it's
not working.
Make sure your phone/music device is on and the
Bluetooth feature is turned on in your device (see
step 2b). If the Bluetooth feature was turned off or
was turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2b) and pair
your device and T3 again (see step 2c).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport