D-Link DSA-3100 User Manual page 22

DSA-3100 Wireless Service Gateway User Manual
d.) Local Network: Select one mode for Local Network Port and specify IP address, Subnet
Mask, and Broadcast (as shown below).
The DSA-3100 comes with two Local Network Port modes, NAT and Router (as shown below).
1.) NAT mode: All outbound IP addresses (the IP addresses must belong to the
network connected to Local Network Port) on Local Network Port will be
translated to the IP address of WAN Port to proceed.
2.) Router mode: All outbound IP addresses on Local Network Port will retain their
addresses; DSA-3100 functions as a router in this mode.
e.) Local Network DHCP Configuration: Configure DHCP Server on Local Network Port.
The DSA-3100 comes with three DHCP Server options (as shown below):
1.) DHCP Disable: Shut down DHCP Server.
2.) DHCP Server: Activate DHCP Server. DHCP Server needs to be configured
properly for successful activation. Related configuration items includes: DHCP Pool
Start IP Address, DHCP Pools End IP Address, Lease Time, Domain Name, WINS IP
Address, DNS Primary IP Address, DNS Secondary IP address.
3.) DHCP Relay: In DHCP Relay mode. It is required to specify other DHCP Server IP
address to select this mode.
19