NEC Univerge SV8100 User Manual page 43

SV8100
___________________________________________________________________________________
___________________________________________________________________________________
SV8100 RGA Application Gateway Conference User Guide
The following Moderator controls are available during a conference on the
web interface from the RealView page:
Start Recording the conference
Stop Recording the conference
Mute or unmute a single or all participants
Lock or unlock the conference
Disconnects selected participants
Transfer selected participants
End the conference
Controlling Conferences with RealView
The following Moderator controls are available during a conference on the
web interface from the RealView page.
Muting Participants using RealView
To mute a particular participant, such as if a participant is in a noisy
environment that is disrupting the call:
1. Check the box for the participant you want to mute.
2. Select the mute icon.
The RealView page displays an M for moderator-muted or S for self-muted
(if the participant used in-conference controls to mute self). B indicates both
Moderator and Self Muting are active.
You can also select the mute icon for the conference to mute all participants.
Disconnecting Participants using RealView
To disconnect a participant and make the reserved port available:
1. Select the box next to the participant(s) you want to disconnect and
select the Disconnect icon.
Revision 1.0
1 - 35