Table of Contents
Advertisement
Doc Title
:
Product Data – User's Guide
Model
:
MBP70x, MFV70x
Press repeatedly to rotate the selected photo
counterclockwise in increments of 90 degrees in browse
mode.
MENU
12
Return to the HOME screen.
SnapShot
13
Capture a picture while in video feed mode and stores
directly in the memory card or USB drive.
3.3
Melody
There are 3 melodies available to play at the camera unit, either repeating one melody or repeating through all
three melodies.
3.3.1
Play/stop the melody from the camera unit
1. Press
on the camera unit to start playing the selected melody.
OR
Press
on the camera unit to start playing the selected melody.
2. During playback, press
3. During playback, press
3.4
Temperature
The camera unit constantly monitors the temperature and displays the reading on the screen in the Video Feed
mode.
3.5
Switching monitoring camera unit
The system allows registering up to four camera units. You can switch the monitoring camera unit by one-touch key
or by menu settings:
By one-touch key:
Press the
button at the back of the digital photo frame or the
photo frame is in video monitoring mode. The digital photo frame will switch to the next registered unit to monitor
your baby. You can switch to other registered camera units by further pressing
registered camera unit being selected in turn.
By menu settings:
The system also allows the digital photo frame to be set to automatically switch among all the camera units, with
each registered camera unit being selected in turn at about 30 second intervals. Refer to section 4.6 for the related
instructions of how to set the digital photo frame to scan through all the camera units automatically.
3.6
Registering a camera unit
IMPORTANT
When you purchase your digital photo frame system, all cameras are already registered to the digital photo frame,
so you do not need to register them.
Camera registration is only necessary if one has become faulty or if you buy a new one.
You can register up to 4 cameras to the digital photo frame.
To register a camera unit:
1. Refer to section 4.6 to access the submenu Registration.
to confirm. The digital photo frame will display Registration Mode, and then display Registering... which
2. Press
indicates it has entered the registration mode.
3. Press and hold
4. The digital photo frame will display Registered when the registration is successfully completed, and the camera
will be assigned a camera unit number, which can be checked from the digital photo frame.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
to step through the different melodies.
to stop playing.
on the camera unit until its power indicator starts flash quickly.
Revision :
Page(s) :
button on the remote control when the digital
or
if necessary, with each
R.00
14 of 24
Advertisement
Table of Contents
