ABB SM2000 User Manual page 43

...4.3 Making Changes to Parameters – Figs. 4.4 to 4.6
Tick Box
1. Totalizer reset enable
2. Totalizer stop/go enable
3. Message select enable
4. Alarm acknowledge enable
Note. Items not selected are indicated
by an X in the parameter window
1 2 X 4
Flashing Cursor
Deletes character
to left of cursor
Note. Tags with a high percentage of capital letters and wide characters such as 'W' or 'M' may appear
truncated in some Operator Views. In such cases, use lower case letters or fewer characters.
Parameter Limits
OK
Note. Values outside the given
range or with too many decimal
places are highlighted
Alphanumeric Keypad
Parameter Value
Spacebar
Alphanumeric Keypad
Fig. 4.5 Data Entry Dialog Boxes
Numeric (0.0...1000.0)
999.9
123.45
Moves the Cursor
4 CONFIGURATION...
List Box
Off
milliAmps
milliVolts
Volts
Resistance
Resistance thermometer
Thermocouple
Number/Symbol Keypad
Parameter Value
Number/Symbol Caps
Parameter Value
41