Key To Symbols; Symbols On The Machine And/Or In The Manual - Husqvarna 120 Operator's Manual

Symbols on the machine and/or
in the manual:
WARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor
Both of the operator's hands must be
used to operate the chain saw.
Never operate a chain saw holding it
with one hand only.
Contact of the guide bar tip with any
object must be avoided.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.
Chain brake, activated (right) Chain
brake, not activated (left)
Refuelling.
Chain oil fill.
Choke: Set the choke control in the
choke position.

KEY TO SYMBOLS

Air purge
Switch off the engine before
carrying out any checks or
maintenance.
This product is in accordance with
applicable EC Directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter
and on the label.
The type plate showing production
number. yyyy is the production
year, ww is the production week
and xxxxx is the serial number.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
yyyywwxxxxx
–
English 7