Panasonic 5000 Series Operating Instructions Manual page 235

MANAGER PROGRAMS
232C hardware installed in your system. An additional connector is required for this test.
1. Turn the keylock MGR Mode.
2. Enter this sequence to advance to the Self-Test menu.
5
3. Select the RS-232C test.
1
Note: You can have up to three RS-232C channels on your workstation. This test checks
each one. NG indicates that RS-232C is not functioning correctly or is not installed.
NG also displays if this test is taken without a direct-connect modem eliminator.
4. When you are ready to return to MGR Mode, press CASH twice.
CASH
Magnetic Card Reader Test
You can use this test to make sure your Magnetic Card Reader is accurately interpreting
5-16
CASH 2
0 CASH
*** RS232C TEST ***
CH0: OK (or NG)
CH1: OK (or NG)
CH2: OK (or NG)
*** TEST END ***
CASH
0 CASH
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0
Self-Tests