Pause Time; Pbx Access Code; [Numbering Plan Id] Outgoing—Public - Panasonic KX-TD500 Programming Manual

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide

Pause Time

1.5 s
1.
1.5 s
2.
2.5 s
3.
3.5 s
4.
4.5 s
Specifies the length of pause time (dialling delay).
The programmed pause time is automatically inserted after a line
access code or a host PBX access code, or manually inserted when
the PAUSE button is pressed by the extension user.
• 1.3 System Features (F/G)
– Host PBX Access
• 2.8.2 If a Host PBX is Connected (U/M)

PBX Access Code

Blank
1-4 digits consisting of 0-9,
Specifies the PBX access codes required to access the Host PBX or
Centrex service.
If the system is installed behind a host PBX or a Centrex system, an
access code is required to make an outside / Centrex call or to
access Centrex features.
Up to four codes can be assigned per Trunk Group.
• 1.3 System Features (F/G)
– Host PBX Access
• 2.8.2 If a Host PBX is Connected (U/M)
[Numbering Plan ID] Outgoing—Public
Default
1.
Default
2.
Unknown
3.
ISDN / Telephony
4.
National Standard
5.
Private
Specifies the Numbering Plan ID applied to the outgoing CO calls
via ISDN Public Switched Telephone Network.
• 3.2 VPN Features (F/G)
– Virtual Private Network (VPN)
or #
Group
129