Listening To The Radio; Storing Automatically (Btm); Storing Manually; Receiving The Stored Stations - Sony CDX-G2050UI Operating Instructions Manual

Listening to the Radio

Listening to the Radio
To listen to the radio, press SRC to select
[TUNER].

Storing automatically (BTM)

1
Press MODE to change the band
(FM1, FM2, FM3, MW, SW1 or SW2).
2
Press MENU, rotate the control dial
to select [GENERAL], then press it.
3
Rotate the control dial to select
[BTM], then press it.
The unit stores stations in order of
frequency on the number buttons.
Tuning
1
Press MODE to change the band
(FM1, FM2, FM3, MW, SW1 or SW2).
2
Perform tuning.
To tune manually
Press and hold SEEK +/– to locate the
approximate frequency, then press SEEK
+/– repeatedly to fine adjust to the
desired frequency.
To tune automatically
Press SEEK +/–.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.

Storing manually

1
While receiving the station that you
want to store, press and hold a
number button (1 to 6) to display
[MEM].

Receiving the stored stations

1
Select the band, then press a
number button (1 to 6).
7
GB