Ip Filter Configuration - Acer 700 Series User Manual

Multifunction router

Hide thumbs

Table Of Contents

Table of Contents

Step 5

Enter the following information:

Rule No.

Rule Name

Interface

Local Address

(From)

(To)

Local Port

Remote Address

Remote Port

Rule No.: a number used for identification purposes.

Rule Name: a name by which you will refer to this rule.

Interface: the specific WAN interface this new selection rule will apply

to.

Local IP Address: the IP address(es) of the local devices this new rule

will apply to. You can select a single IP address, a range of IP addresses,

a network, or any IP addresses. The screen may change to show fields

you need to fill out accordingly. For example, if you select range, you will

also see (From) and (To) fields where you need to fill out the starting IP

address and the ending IP address.

Local Port: the port number(s) of the local devices this new rule will

apply to. See Table 7-1 for some examples of TCP/IP port assignments.

Remote IP Address: the IP address(es) of the remote devices this new

rule will apply to. You can select a single IP address, a range of IP

addresses, a network, or any IP addresses. The screen may change to

show fields you need to fill out accordingly. For example, if you select

range, you will also see (From) and (To) fields where you need to fill out

the starting IP address and the ending IP address.

Remote Port: the port number(s) of the remote devices this new rule will

apply to. See Table 7-1 for some examples of TCP/IP port assignments.

If you highlighted an existing entry (by selecting the Select to Edit

button) and clicked Edit instead, a similar screen will display, with all

fields already filled out by you previously. Then you can make changes as

necessary.

If you highlighted an existing entry and clicked Delete instead, the