Contents 1 Important Help and support Safety Care for your product Care of the environment 2 Your product Main unit Remote control Connectors 3 Connect Placement Connect audio from TV and other devices 6 4 Use your product Adjust the volume Choose your sound MP3 player USB storage devices...
• Disconnect the product from the power For extensive online support, visit outlet before lightning storms. www.philips.com/support to: • When you disconnect the power cord, • download the user manual and the quick always pull the plug, never the cable.
Risk of contamination! Care of the environment • Do not mix batteries (old and new or carbon and alkaline, etc.). Disposal of your old product • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type. •...
Remote control This section includes an overview of the Congratulations on your purchase, and remote control. welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Main unit This section includes an overview of the main unit.
d +/- (Volume) Connectors Increase or decrease volume. This section includes an overview of the Mute or restore volume. connectors available on this product. f BASS +/- Increase or decrease bass. g NIGHT Turn night mode on or off. h TREBLE +/- Increase or decrease treble.
3 Connect Connect audio from TV and other devices This section helps you connect this product to a Play audio from TV or other devices through TV and other devices. this product. For information about the basic connections of Use the best quality connection available on this product and accessories, see the quick start your TV and other devices.
Before you start • Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support. • Switch this product to the correct source Using an analog cable, connect the AUX for other devices. connectors on this product to the AUDIO OUT connectors on the TV or other device.
MP3 player Note • Virtual surround is applicable for the audio codecs, such Connect your MP3 player to play your audio as MP3, PCM and MPEG (except Dolby Digital). files or music. What you need Equalizer • An MP3 player. •...
5 Apply factory Note settings • This product may not be compatible with certain types of USB storage device. • If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. You can reset this product to the default setting •...
3 seconds, and then the factory setting is restored. Update software via USB Check the latest software version on www.philips.com/support. • Search for your model and click on "Software and drivers". Download the software into a USB flash drive.
7 Wall mount 8 Product specifications Note • Improper wall mounting may result in accident, injury or Note damage. If you have any query, contact Consumer Care in your country. • Specifications and design are subject to change without • Before wall mounting, make sure the wall can support notice.
If you have problems using this product, check Subwoofer the following points before you request service. If you still have a problem, get support at • Impedance: 6 ohm www.philips.com/support. • Speaker drivers: 1 x 134 mm (5.25") woofer Main unit •...
Page 15
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Page 16
Commercial Company Ltd., and WOOX Innovations (Shanghai) Commercial Company Ltd., is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.