Installing Crpi Optical Cables - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
Figure 6-33 Install an Ethernet cable between an RHUB and a pRRU3901
(1) Ethernet cable
Figure 6-34 Install an Ethernet cable between an RHUB and a pRRU3902
(1) Ethernet cable
----End
Follow-up Procedure
1.
2.

6.4.7 Installing CRPI Optical Cables

Optical fibers can be used to interconnect BBU and RHUBs, or cascade RHUBs.
Context
l
l
Issue 06 (2015-10-30)
Route the cable, and then use a cable tie to bind the cable. For details, see
Requirements for Cable
Label the installed cable. For details, see section
Multi-mode optical modules for CPRI ports are labeled MM and each has a black or gray
puller.
Single-mode optical modules are labeled SM and each has a blue puller.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) CPRI_E0 port on the pRRU3901
(2) CPRI_E0 port on the pRRU3902
Layout.
11.3 Attaching an L-Shaped
6 Installing an RHUB
6.4.1
Label.
41