3
03.02
Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide CAD Reader (CAD) – 03.02 Edition
3.1 Additional settings and displays
Colors
You can set the number and names of the settable colors for individual
contour elements in the Colors menu.
The system defaults become effective again when you select
"Default".
Axis names
Axis names are specified with the relevant plane in the contour
display, e.g.:
• Axis names:
• Interpolation parameters:
Capture radius
Here you can set the capture radius in millimeters within which the
elements are interpreted as being "associated". This enables you to
acquire and process imprecisely defined drawings.
A large capture radius increases the number of possible following
elements.
Options
Input screenform for selecting target systems or displayed plane as
well as settings for display and representation.
Additional Settings
1st axis X, 2nd axis Y, 3rd axis Z
1st axis I, 2nd axis J, 3rd axis K
3
3-29