Debug From Multiple Programming Tools - Mitsubishi Electric Q01UCPU User Manual

3.15

Debug from Multiple Programming Tools

This function allows simultaneous debugging from multiple programming tools connected to modules (such as a CPU
module and serial communication module). This function is useful when debugging multiple files divided according to
processes or functions.
(1) Description
The following table lists the combinations of functions that can be executed simultaneously using this function.
Function in
Monitor
execution
*1
monitor
Program monitor list
Interrupt program monitor
list
Monitor condition setup
Online change
Scan time measurement
Sampling trace
Executional conditioned
device test
*1 This includes a ladder monitor, device batch monitor, entry data monitor, entry ladder monitor, and local device monitor.
*2 Cannot be performed simultaneously when the step number, or the step number and device number, are set in the
monitor condition.
*3 Cannot be performed simultaneously unless the step number is set to the trace point or the trigger point.
*4 Cannot be performed simultaneously in the following cases.
•
The data to be changed online includes the registration of an executional conditioned device test.
•
When adding a ladder block by online change, registration of an executional conditioned device test is included in
the ladder block immediately after the one where the ladder block is to be added.
•
The program to be changed online includes registration of an executional conditioned device test.
: Can be simultaneously performed,
Interrupt
Program
program
monitor
*1
monitor
list
list
×
×
: Partially restricted, × : Can not be simultaneously performed
Function executed later
Monitor Scan time
Online
condition measure
change
setting ment
*2
×
× × ×
× ×
*3
*4
CHAPTER 3 FUNCTIONS
Executional
Sampling
conditioned
trace
device test
× ×
×
187
3