Lubrication Points And Types Of Lubricant; Tightening Torque; Wiring Diagram - Hitachi G 10SF3 Technical Data And Service Manual

(8) When replacing the Gear Cover Ass'y [3], lubricate the metal part with mixed oil.
Mixed oil: A mixture of Hitachi Power Tool Grease No. 2 (Unilube No. 00 Code No. 939302 is recommended)
and turbine oil
Mixture ratio ......... 1:1 (weight ratio)

8-3. Lubrication Points and Types of Lubricant

Pinion chamber of Gear Cover Ass'y [3] ..................... Nippeco grease (SEP-3A) 10 g
Metal ............................................................................ Mixed oil 0.5 cc

8-4. Tightening Torque

D4 Tapping Screws [10] [37] [38] [48].................................... 2.0
M4 Slotted Hd. Tapping Screw (Seal Lock) [6] ....................... 1.8
M4 Seal Lock Screws (W/Sp. Washer) [18] [23] .................... 1.8
D5 Tapping Screw [1] .............................................................. 2.9
M5 Machine Screw (W/Sp. Washer) [27] ................................ 1.6
M7 Special Nut [4] .................................................................. 6.4
Brush Cap [39] ........................................................................ 0.6

8-5. Wiring Diagram

Stator [11]
Black
Black
Quantity ........... 0.5 cc
(Code No. 930035 is recommended.)
Generously rub grease onto the gear and pinion.
Mixed oil: Mixture of Hitachi Power Tool Grease No. 2
(Unilube No. 00, Code No. 939302) and
turbine oil
Mixture ratio ................ 1:1 (weight ratio)
0.5 N•m (20 5 kgf•cm, 1.5
0.4 N•m (18 4 kgf•cm, 1.3
0.4 N•m (18 4 kgf•cm, 1.3
0.5 N•m (30 5 kgf•cm, 2.2
0.4 N•m
1.0 N•m
0.2 N•m
Switch [50]
Black
Noise
Suppressor [46]
Black
Pillar Terminal [43]
--- 11 ---
0.4 fb-lbs.)
0.3 fb-lbs.)
0.3 fb-lbs.)
0.4 fb-lbs.)
(16 4 kgf•cm, 1.2 0.3 fb-lbs.)
(65 10 kgf•cm, 4.7 0.7 fb-lbs.)
(6 2 kgf•cm, 0.4 0.1 fb-lbs.)
Brown
Cord [51]
Blue