D-Link DGE-530T Quick Install Manual page 8

Hide thumbs Also See for DGE-530T:

Configure your Adapter

If you are not using a DHCP capable gateway/router, or you need to

assign a static IP address, please follow the steps below.

Step 1:

2000: Click on Start > Settings > Control Panel >

Windows

Network Connections

Windows

XP: Click on Start > Control Panel > Network

Connections

Windows Vista

: Click on Start > Control Panel > Network and

Internet > Network and Sharing Center > Manage network

connections

7: Click on Start > Control Panel > Network and Internet

Windows

> Network and Sharing Center > Change Adapter Settings

Step 2:

Right-click on the Local Area Connection, which represents your

D-Link network adapter, and select Properties.

Step 3:

Highlight Internet Protocol (TCP/IP) and click Properties.

Step 4:

Click Use the following IP address and enter an IP address that

is on the same subnet as your network or the LAN IP address on

your router.

Example: If the router's LAN IP address is 192.168.0.1, make your

IP address 192.168.0.X where X is a number between 2 and 99.

Make sure that the number you choose is not in use on the network.

Set Default Gateway the same as the LAN IP address of your router

(192.168.0.1).

D-Link DGE-530T Quick Install Guide

Table of Contents