Haier X220P User Manual page 29

This chapter will briefly introduce the installation of the driver. Includes the following
topics:
Driver installation
You can select installation of the necessary drivers according to the actual need , follow
the prompts for easy operation.
The following instructions to XP driver system installation:
Chipset driver's installation
1、 Open the CD-ROM drive and see a folder called Chipset, double-click to enter.
2、 Double-click the setup.exe file, start the driver installation, please follow the prompts
to complete the installation.
3、 After the closure of the installation dialog box, if at this time the dialogue jumped out
in the window screen is asked to restart the laptop to complete the settings, click OK. If
the screen does not jump out of the dialogue window and not asked to restart the laptop,
the device driver installation is completed.
4、After restarting the laptop, the device driver installation is completed.
The graphics card driver's installation.
1，Open the CD-ROM drive and see a folder called Graphics, double-click to enter.
2，Double-click the setup.exe file, start the driver installation, please follow the prompts
to complete the installation.
3, after the closure of the installation dialog box, at this time if the dialogue window
jumped out from the screen is asked to restart the laptop to complete the settings, click
OK. If the screen does not jump out of the dialogue window and no need asked to restart
the laptop, the device driver installation is completed.
4, restart the laptop, the device driver installation is completed.
Sound card driver installation
1，Open the CD-ROM drive and see a folder called Audio, double-click to enter.
2，Double-click the setup.exe file, start the driver installation, please follow the prompts
to complete the installation.
3, After the closure of the installation dialog box, at this time if the dialogue window
jumped out from the screen is asked to restart the laptop to complete the settings, click
OK. If the screen does not jump out of the dialogue window and no need asked to restart
the laptop, the device driver installation is completed.
4, restart the laptop, the device driver installation is completed.
Network card driver installation
1， Open the CD-ROM drive and see a folder called LAN, double-click to enter.
2， Double-click the setup.exe file, start the driver installation, please follow the prompts
to complete the installation.
3, After the closure of the installation dialog box, at this time if the dialogue window
jumped out from the screen is asked to restart the laptop to complete the settings, click
29 of 35
th
Chapter 6 Software Driver Installation
Copy Right Reserved