Dnp Serial Ied Attributes - ABB COM600 Series User Manual

1MRS755495
5.4.4.
COM600 series, Version 5.0
DNP 3.0 Serial Slave (OPC) User's Manual
Property / Para- Value or Value range/ Default
meter
Failed Transmis-
sions
Transmitted Com-
mands
Transmitted Replies
Received Messages
Parity Errors
Overrun Errors
Checksum Errors
Framing Errors
Buffer Overflow
Errors

DNP Serial IED attributes

Table 5.4.4-1 DNP Serial IED attributes
Property / Para- Value or Value range/ Default
meter
In Use 0 = Out of use
1 = In use
Default: 0
Description
The number of failed transmissions.
The number of transmitted commands.
The number of transmitted replies.
The number of received data messages.
The number of times a parity error has
occurred.
The number of times an overrun error has
occurred.
The number of times a redundancy error
has occurred.
The number of times a framing error has
occurred.
The number of times there has been a
buffer overflow.
Description
Data type: Integer
Access: No limitations
The operational status of the device - in
use or out of use. Taking the device out
of use with this attribute stops all data
communication with the device. All opera-
tions that would result in a data exchange
are disabled. The device itself is not
affected by the attribute, only the protocol
stack's image of the device. Setting In use
to 1 is allowed only if the device address
is legal.
67