LG G3F-AD4A User Manual page 70

Chapter 6. BUFFER MEMORY CONFIGURATION AND FUNCTION
6.2.7 Number / Time Average Processing Setting Area (G3F-AD4A,G4F-AD2A: address 8, G3F-AD4B: address 21)
1) It depends on A/D conversion module channel whether average processing is followed to time or number.
(G3F-AD4A for 4 channel in block, G4F-AD2A/G3F-AD4B for ev ery channel)
2) No specification of number/time average processing leads to number average processing.
3) Number/time average processing is as follows.
(1) G3F – AD4A
Address "8"
A) 4 bits are available, and 1 bit for number/time average processing setting is performed for continuous 4
channels in block.
Bit 0 : Number/time average processing to channel 0,1,2,3 is specified in block.
Bit 1 : Number/time average processing to channel 4,5,6,7 is specified in block.
Bit 2 : Number/time average processing to channel 8,9,10,11 is specified in block.
Bit 3 : Number/time average processing to channel 12,13,14,15 is specified in block.
B) Number/time average processing to 4 channel in a bit should not be specified in block.
(Ex. Number average processing to channel 0 and time average processing to channel should not be
specified.)
(2) G3F-AD4B
Address "21"
(3) G4F – AD2A
Address "8"
Remark
Before number /time average processing is set, average processing enable/disable has to be
specified.
Ignored
Number/time average processing specification
[Bit Off(0) : Number average processing, Bit On(1) :Time average processing]
Ignored
6 - 9
Number/time average processing specification
[Bit Off(0) : Number average processing,
Bit On(1) :Time average processing]
Number/time average processing specification
[Bit Off(0) : Number average processing,
Bit On(1) :Time average processing]