Display A Graphical Picture/Sound Adjustment Screen - Pioneer Elite KURO PRO 111FD Operating Instructions Manual

Basic Operations For Television Viewing
03
Follow the steps below to adjust options for the preferred picture quality.
1 ) Access the
2 ) Select an option.
3 ) Use the TOOLS button to toggle between the previous and adjusted images.
4 ) Repeat Steps 2 and 3 to continue adjusting the option as needed.
5 ) Repeat Steps 2 through 4 to adjust other picture options.
6 ) Press HOME MENU to exit the menu.
Note: if no selections are made within 60 seconds, the menu closes automatically and the current settings are
saved to memory.
To exit the menu without saving the changes, switch to the Before screen then press HOME MENU.

3.4.4 Display a Graphical Picture/Sound Adjustment Screen

OPTIMUM
Selecting
submenus. Select
Performance provides an on-screen graphic monitor for multiple picture and sound adjustments.
OPTIMUM Performance
OPTIMUM Performance displays on-going picture and sound adjustments using graphical data when selecting
OPTIMUM from the AV Selection menu. OPTIMUM Performance provides the following bar graph data:
• Analyzer: Histogram, RGB, Room Light, Color Sensor
• Picture: Contrast, Brightness, Color, Sharpness, Color Temp, Gamma
• Sound: Level
OPTIMUM Performance
[OPTIMUM] On
To display OPTIMUM Performance, follow the procedure below.
1 ) Access the
AV Selection
2 ) Select
OPTIMUM
3 ) Select
4 ) Select OPTIMUM Performance
The OPTIMUM Performance appears. To cancel the OPTIMUM Performance option, press
Note: When OPTIMUM is selected, press and hold
Performance.
OPTIMUM Performance compares the picture and sound quality between "Off" (unadjusted) and "On"
(adjusted using the
48
En
Picture Setup.
through the
from the AV Selection menu causes the Picture menu to display different AV source
On
for the Sound Control option to automatically adjust the sound quality, and OPTIMUM
[Analyzer]
Histogram
RGB
Room Light
OPTIMUM On/Off Color Sensor : Disable
Picture Setup.
through the
from the Picture menu.
from the AV Selection menu.
from the Picture menu.
button).
TOOLS
[Picture] Contrast
Brightness
Color
Sharpness
Color Temp
Gamma
on the remote control to show OPTIMUM
DISPLAY
[Sound]
60 1k 12k(Hz)
.
EXIT