Pioneer DVR-540H-S Operating Instructions Manual page 111

The Initial Setup menu
Setting
Manual CH Setting
VCR Plus+ CH
Setting
Video In/Out
Component Video
Out
Audio In
External Audio
Dual Mono
Recording
Options Explanation
Next Screen Proceed to the next screen if you need to adjust any
of the settings made by auto tuning.
• Change channels using the
• To skip the displayed channel (because there is no
station assigned to that channel), change the Skip
setting to On.
• To manually fine tune the channel, change the AFT
setting to Off then adjust the Level setting.
Guide channels are used by the VCR Plus+ system
so that the channel number specified in the VCR
Plus+ programming numbers can be guaranteed to
correspond to the correct station. Look in your TV
guide to see which channel numbers should be
assigned to which guide channels.
• Use the
for setting.
• Use the
number.
• Use the PREV
the previous/next 10 guide channels.
• To return to the Initial Setup menu, press ENTER.
Interlace •
Select if your monitor/TV is not compatible with pro-
gressive-scan video.
Progressive
Select if your monitor/TV is progressive-scan compat-
ible. Check the operating instructions that came with
your monitor/TV if you're not sure.
Stereo •
Select if the audio from the currently selected exter-
nal input is standard stereo.
Dual Mono
Select if each channel carries a separate soundtrack.
L •
Select to record the left channel of an external dual
mono source when recording to DVD in Video mode,
to HDD with HDD Recording Format set to Video
Mode On, or in LPCM mode.
R As above, but for right channel recording.
CH +/–
buttons.
buttons to change the guide channel
buttons to change the channel
/ NEXT
button to display
14
111
En