Lenovo ThinkStation P510 Hardware Maintenance Manual page 112

4. Install the 3.5-inch storage drive into the flex bay storage enclosure. Then, install the four screws to
secure the drive to the flex bay storage enclosure.
Figure 20. Installing the 3.5-inch storage drive to the flex bay storage enclosure
5. Slide the flex bay storage enclosure into the optical drive bay. See "Device in the optical-drive bay" on
page 102.
6. Connect the signal cable and the power cable to the new storage drive.
Figure 21. Connecting the cables to the storage drive
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 189.
2.5-inch storage drive
To install or replace a 2.5-inch storage drive, do the following:
106
ThinkStation P510 and P710 Hardware Maintenance Manual