Dts Out; Linear Pcm Out; Mpeg Out - Pioneer 655A Operating Instructions Manual

08 The Initial Settings Menu

DTS Out

• Default setting: DTS > PCM
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
If your AV receiver (or other connected
component) has a built-in DTS decoder, set
this to DTS, otherwise set to DTS > PCM
(DTS audio is converted to more compatible
PCM audio). Check the manual that came
with the other component if you're unsure
whether it is DTS compatible.
• If you set to DTS with a non-DTS
compatible amplifier, noise will be
output when you play a DTS disc.
• This setting applies only to DTS audio on
DVDs. DTS-CD always output DTS
digital audio as-is regardless of this
setting.

Linear PCM Out

• Default setting: Down Sample On
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
52
En
Digital Out DTS
Dolby Digital Out DTS > PCM
DTS Out
Linear PCM Out

MPEG Out

Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display Linear PCM Out
Options MPEG Out
Speakers
If your AV receiver (or other connected
component) is compatible with high
sampling rates (96 kHz), set this to Down
Sample Off, otherwise set it to Down
Sample On (96 kHz audio is converted to a
more compatible 48 kHz). Check the manual
that came with the other component if you're
unsure whether it is 96 kHz compatible.
• Even when set to Down Sample Off,
some discs will still output down-
sampled audio through the digital
outputs (you only get full sampling rate
audio through the analog outputs).
• High sampling rate DVD-Audio discs
(192kHz or 176.2kHz) automatically
output down-sampled audio through the
digital outputs.
MPEG Out
• Default setting: MPEG > PCM
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display Linear PCM Out
Options MPEG Out
Speakers
Down Sample On
Down Sample Off
MPEG
MPEG > PCM