Marking Recorded Tracks To Skip - Pioneer PDR-W739 Operating Instructions Manual

Compact disc recorder / multi-cd changer
Hide thumbs Also See for PDR-W739:
Table of Contents

Advertisement

Î
&
#
$
SKIP
SKIP SET
COMPACT DISC RECORDER/
MULTI-CD CHANGER
REMOTE CONTROL UNIT

Marking recorded tracks to skip

Although you can't erase tracks on a CD-R disc, you can set what
are called 'skip IDs'. These tell a CD player (though many do not
recognize skip IDs) not to play a particular track, but to skip to the
next one on the disc.
You can also set skip IDs on CD-RWs, although it's probably a less
useful feature since you can always erase the last track.
Once a skip ID is set, you can clear it, but be careful: you can set up
to 21 skip IDs per disc, but repeatedly setting and clearing skip IDs
in different recording sessions will reduce this number.
Setting skip IDs:
1
With the recorder stopped, press
SKIP.
The display indicates that you're in skip set/clear mode and
playback starts.
TRK
DISC
1
DISC
2
DISC
3
ALL
FADER
L
–dB
40
18
X1
R
Use the 4 and ¢ buttons to
2
select the track you want to skip.
The
indicator lights if the track playing is already
SKIP
marked with a skip ID.
3
Press SKIP SET.
The
indicator starts to blink.
SKIP
TRK
1
DISC
DISC
2
3
DISC
ALL
FADER
L
–dB
40
18
X1
R
COMPACT DISC RECORDER / MULTI-CD CHANGER
3
- COMPACT DISC MULTI CHANGER
MIN
SEC
CD-R
ANA
6
0
OVER
CD-R
SKIP
ANA
6
0
OVER
6 Finalizing and Erasing
◊ÛB¿ˆ≥≤/
• If the track you selected in step 2 above already had a skip
ID set, playback jumps to the next track that doesn't have a
skip ID set.
• Use the 4 and ¢ buttons if you want to change the
track again here.
• If there's no room left on the disc to record another skip ID,
the display will show the message
4
Press SKIP SET again to set the skip
ID for the track playing.
The
indicator lights in the display once a skip ID has
SKIP
been set.
• To cancel, press 7.
5
Set further skip IDs by repeating
steps 2 to 4.
When you're finished, press 7 to stop
6
the disc and press 0 (CD-R side).
Until you eject the disc, the recorder stores the skip ID
information in its memory. On pressing 0, the recorder
writes the skip ID information onto the disc.
Be careful: don't switch off the unit before ejecting the
disc—you'll lose this sessions skip ID changes!
OPEN/CLOSE
0
COMPACT DISC DIGITAL RECORDER
REC/
REC MUTE
CD-R CONTROL
¡ ¢
4 1
7
.
SKIP FULL
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents