Pioneer Super Tuner III D DEH-3150UB Brochure page 49

Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
TS-W3002D4 TS-W2502D4 TS-W308D2
TS-W258F TS-SW3001S4 TS-SW3001S2
To ensure that you get more natural bass, we've
incorporated out new Basalt fiber technology into
our subwoofers. The volcanic-rock fibers create
Shallow-Type Subwoofers
TS-SW3001S4 TS-SW3001S2 TS-SW2501S4
With enhanced maximum power and handling shallow dimensions, TS-SW subwoofers
are more versatile than ever. The Full (30 cm) and Regular (25 cm) sizes can be installed
behind and under seats, and the Compact (20 cm) size can even be mounted on rear
sidewalls and trays of smaller cars.
Full-size
30 cm
(12")
Regular
25 cm
(10")
Compact
20 cm
(8")
Frequency Changes Before and After Reliability Test
Air-Suspension Control System
Thanks to Pioneer's unique
Air-Suspension Control System,
TS-SW subwoofers offer deep,
rich bass in a shallow, compact
form. Air is trapped within the
composite IMPP™ double cone,
between the main cone and the
drive cone behind it.
Component Enclosed Subwoofers
TS-WX301
30 cm Bass-Reflex Subwoofer
• Blue IMPP composite cone • Maximum input: 800 W
• Bass-reflex design • Nominal input: 150 W
• 37 liters wooden enclosure
• 4-layer, long voice coil
• Single nomex damper
• Extended excursion design
• Extended and vented pole yoke
• Best tuned parameters
TS-WX22A
20 cm Sealed Active Subwoofer
• Built-in MOSFET 150 W max. monaural amplifier
• 20 cm IMPP composite cone woofer with
strontium magnet
• Wired remote control (input level,
crossover frequency, phase)
• Speaker and RCA level inputs
• Built-in variable LPF
(50 Hz to 125 Hz, –12 dB/oct.)
• Aluminum die-cast heatsink
• Maximum output: 150 W
• Nominal output: 60 W
Can be installed at rear luggage room, under seat, etc.
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
TS-W308D4 TS-W258D2
TS-SW2501S4 TS-SW2501S2
a cone that is lightweight, rigid, well damped, stable
in temperature extremes, and more environmentally
friendly. In short, this bass really rocks.
TS-SW2501S2 TS-SW841D
Full-size
pickup trucks etc.
Behind seats Under seats
Rear sidewall Rear tray
Standard-size
pickup trucks etc.
SUV Sedan Compact vehicles
35
Subwoofer with Air-Suspension
33 Hz
Control System
30 Hz
30
28 Hz
Conventional subwoofers
25
24 Hz
Before test
After test
20
800 W Max.
150 W Max.*
* Output Power
Rear terminals
TS-W258D4 TS-W308F
TS-SW301 TS-SW251
The pressure of this air varies as the cones move back and forth, resulting in smoother,
more precise linearity. The trapped air behaves like a spring, eliminating the need for
a conventional spider structure, so the unit can be made shallow enough to fit in a
tight space. Inside the enclosure, a drive cone deflects air pressure and a fin-shaped
basket smoothly directs air sideways. This makes bass output remarkably stable,
despite these units' compact size. The system also enhances durability, as the
subwoofers are subjected to smaller frequency changes (and less wear and tear)
than conventional subwoofers.
TS-SW3001S4 Cross Section
High Power 6-Layer Aluminum
Wire Winding Voice Coil
Air Suspension
Excursion
Control System
Interlaced Ultra Long
Glass Fiber IMPP Cone
TS-WX11A
13 cm × 21 cm Sealed Active Subwoofer
• Built-in MOSFET 150 W max.
monaural amplifier
• 13 cm × 21 cm aluminum and IMPP
composite cone woofer with
strontium magnet
• Wired remote control (input level,
crossover frequency, phase)
• Speaker and RCA level inputs
TS-WX206A
20 cm Bandpass Active Subwoofer
• Built-in MOSFET 150 W max. monaural amplifier
• 20 cm IMPP composite cone woofer with strontium magnet
• Large dual port bandpass design for rich and powerful bass
• Speaker and RCA level inputs
• Input level control/phase switch
• Built-in variable LPF
(50 Hz to 125 Hz, –12 dB/oct.)
• Aluminum die-cast heatsink
• Maximum output: 150 W
• Nominal output: 60 W
Interlaced Basalt/Carbon
Fiber Reinforced IMPP Cone
Cone Ring
3-Layer Fiber Woven
Design
Radial Surround
(Drive Cone: M-Shape)
Double Cone
Reinforced Nodes
Bottom-Hold Aluminum
Die-Cast Rigid Chassis
150 W Max.*
• Built-in variable LPF (50 Hz to
* Output Power
125 Hz, –12 dB/oct.)
• Aluminum die-cast heatsink
• Maximum output: 150 W
• Nominal output: 50 W
150 W Max.*
* Output Power
Sound quality
adjustment knobs
49