Interfaces; Interface Overview - Siemens SINUMERIK 840D sl Manual

Interfaces

6.1

Interface overview

Interface overview
Table 6-1
Interface
DRIVE-CLiQ (0)
DRIVE-CLiQ (1)
DRIVE-CLiQ (2)
DRIVE-CLiQ (3)
DRIVE-CLiQ (4)
DRIVE-CLiQ (5)
Ethernet (HMI) IE1/OP
Ethernet (factory) IE2/NET
Ethernet (service socket)
1st PROFINET interface
2nd PROFINET interface
3rd PROFINET interface
4th PROFINET interface
Digital I/Os
24 V power supply
USB interfaces
PROFIBUS DP1
PROFIBUS DP2/MPI
RS232 interface
Test sockets (T0, T1, T2, and M)
CompactFlash Card
Dual fan/battery module
NCU
Manual, 07/2007, 6FC5397-0AP10-2BA0
Overview of available external interfaces
Designation
X100
X101
X102
X103
X104 (only NCU 720/730)
X105 (only NCU 720/730)
X120
X130
X127
Port 1 (only "PN NCUs")
Port 2 (only "PN NCUs")
Port 3 (only "PN NCUs")
Port 4 (only "PN NCUs")
X122, X132
X124
X125/X135
X126
X136
X140
X131 - X134
X109
X190
Plug-connector type
Spec. RJ45 socket
Spec. RJ45 socket
Spec. RJ45 socket
Spec. RJ45 socket
Spec. RJ45 socket
Spec. RJ45 socket
Standard RJ45 socket
Standard RJ45 socket
Standard RJ45 socket
Standard RJ45 socket
Standard RJ45 socket
Standard RJ45 socket
Standard RJ45 socket
Micro Combicon 2x12-pin
Combicon 4-pin
USB socket
9-pin SUB-D socket
9-pin SUB-D socket
9-pin SUB D plug connector
Sockets on the circuit board
50-pin socket
6-pin
6
43