System Configuration - Siemens SINUMERIK 840D sl Manual

System overview

2.2 System configuration

2.2 System configuration
SINUMERIK 840D sl combines CNC, HMI, PLC, closed-loop control, and communication
tasks within a single NCU (Numerical Control Unit).
Components
For operation, programming, and visualization purposes, the corresponding operating
software is already integrated into the CNC software for the NCU and therefore runs on the
high-performance NCU multi-processor module. For increased operating performance, the
SINUMERIK PCU 50.3 industrial PC can be used.
Up to four distributed OPs can be operated on one NCU/PCU. The operator panel can be
installed as a Thin Client at a distance of up to 100 m.
Figure 2-1 Typical topology of the SINUMERIK 840D sl complete system
The following components can be attached to the Control Unit:
● SINUMERIK operator panel front with TCU/PCU 50.3 and Machine Control
● SIMATIC CE panel
● SINUMERIK handheld units
● Distributed PLC I/O via PROFIBUS DP or PROFINET I/O (only applies to NCU 720.2 PN
● SINUMERIK PP 72/48 peripheral module
● SINUMERIK ADI 4 analog drive interface for four axes
16
Panel/Machine Push Button Panel
and NCU 730.2 PN)
Manual, 03/2010, 6FC5397-0AP10-3BA0
NCU