Setting Method - Mitsubishi Electric Q03UDVCPU User Manual

6.2

Setting Method

The setting required for using the predefined protocol function is described below.
Select "User Protocol Library" in the "Add Protocol" window to read the protocol stored by the user. For details of the user
protocol library, refer to the following.
GX Works2 Version 1 Operating Manual (Intelligent Function Module)
CHAPTER 6 DATA COMMUNICATIONS USING THE PREDEFINED PROTOCOL
1.
Open the "Predefined Protocol Support Function"
window.
[Tool]
Function]
2.
Create a new file.
[File]
3.
In the "Add Protocol" window, select "Predefined
Protocol Library" or "Add New".
When "Predefined Protocol Library" is selected, select a
desired protocol from the library registered in GX
Works2.
[Predefined Protocol Support
[Built-in Ethernet]
[New...] "Add"
6
77