Cisco TelePresence SX10
Introduction
Video commands
xCommand Video ActiveSpeakerPIP Set
Sets position for the active speakers PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video ActiveSpeakerPIP Set Position:
where
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
Position
UpperRight
Select one of the predefined positions.
xCommand Video Input Source SetActiveConnector
Select which connector is active.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Input Source SetActiveConnector [ConnectorId: ConnectorId]
where
: Integer (2..3)
ConnectorId
The identifier (ID) of the connector. Connector [n] has ID n. Check the Video Input
Connector status to find the connector IDs.
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API
xConfiguration
Position
xCommand
xCommand
xCommand Video Layout LayoutFamily Set
Select the screen layout mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Layout LayoutFamily Set [Target: Target] [CallId: CallId]
LayoutFamily:
LayoutFamily
[CustomLayoutName: "CustomLayoutName"]
where
: local/remote
Target
Select if the target is the local layout or the remote layout.
: Integer (0..65534)
CallId
The CallID is returned when the xCommand Dial command is run. During the call you
can run the xStatus Call command to see the CallId.
: auto/custom/equal/overlay/prominent/single
LayoutFamily
Select a layout family.
: String (1, 128)
CustomLayoutName
Enter a name for the layout.
xCommand Video PresentationPIP Set
Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationPIP Set Position:
where
: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/
Position
UpperRight
Select one of the predefined positions.
125
API Reference Guide
xStatus
Appendices
Position
Copyright © 2017 Cisco Systems, Inc. All rights reserved.