GE Mentor Visual iQ User Manual page 23

Mapping the Network Drive and Sharing Folders
9
– If you choose to give the Visual iQ's File Manager access to a folder on a network-
connected computer, click on Setup (see above) to open the network-mapping process
shown here. Next, select Done to confirm that the network connected PC has at least
one folder identified for sharing.
10
– Enter the drive letter you wish to assign (in the Visual iQ's File Manager) to the
shared folder, then input the complete path to the folder on the network-connected
PC. Following is an example of a complete path to insert in the Folder line: \\Device
Name\TestShare Folder. When the folder path and username/password (assuming it
is a password protected network) have been entered, click Done.
11
– To share one of the Visual iQ's folders with a network-connected computer, click
on Setup (see above) to open the file-selecting process. The path in the blue bar shown
here identifies the folder that will be shared. Next, select Done to display the Warning
statement listing the folder that will be shared, and select Done again to confirm that
the identified folder is the one you wish to share with a network-connected PC.
23
07/30/2014