Troubleshooting Tips - GE UVB30 Owner's Manual & Installation Instructions

Troubleshooting tips ... Before you call for service
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem
Fan does not work
Vent does not work
49-80777-1
Possible Cause
The vent is not fully extended.
The vent is not plugged into an outlet.
The raise/lower pad did not engage
the lift motor.
The circuit breaker may have tripped.
Sufficient makeup (replacement) air is
required for exhausting appliances to
operate to rating.
What To Do
Press the ON/OFF pad.
Plug the vent into a 120V power outlet.
Hold down the pad for a couple of seconds to
activate the motor.
Check the circuit breaker— reset if necessary.
Check with local building codes, which may
require or strongly advise the use of makeup
air. Visit GEAppliances.com for available
makeup air solutions.
17