Huawei EchoLife ET323 User Manual page 46

EchoLife ET523 IP Phone User Manual
Field
Offhook Auto
Dial
DTMF Payload
Type
Syslog Server
Syslog Level
NTP server
Allow DHCP
Option 42 to
override NTP
server
Description
This feature is only supported for primary account or Account 1
or Line1. When the feature is enabled, the phone will function
as a one-line phone. The remaining 3 lines are not active.
This parameter sets the payload type for DTMF using
RFC2833. The default value is 97.
The IP address or URL of System log server. This feature is
particularly useful for ITSPs.
Select the ATA to report the log level. The default value is
NONE. The level is one of " DEBUG" , " INFO" , " WARNING"
or " ERROR" . Syslog messages are sent based on the following
events:
Product model/version on boot up (INFO level)

NAT related info (INFO level)

Sent or received SIP message (DEBUG level)

SIP message summary (INFO level)

Inbound and outbound calls (INFO level)

Registration status change (INFO level)

Negotiated codec (INFO level)

Ethernet link up (INFO level)

SLIC chip exception (WARNING and ERROR levels)

Memory exception (ERROR level)

The Syslog uses USER facility. In addition to standard Syslog
payload, it contains the following components: GS_LOG:
[device MAC address][error code] error message.
For example: May 19 02:40:38 192.168.1.14 GS_LOG:
[00:0b:82:00:a1:be][000]. Ethernet link is up.
This parameter defines the URI or IP address of the NTP server.
It is used to display the current date/time in the phone.
If enabled, the DHCP server can override the NTP server
configured in the phone. This is for ITSP or system
administrator. End user should ignore this.
41
4 Configuration Guide