Table of Contents
Advertisement
RUGGEDCOM RS969
Installation Guide
Section 2.2.3
Single Low DC Power Supply Wiring Examples
Figure 9: DC Power Supply Wiring Example (Mini-Change Connector)
Figure 10: DC Power Supply Wiring Example (M23 Connector)
NOTE
• 88-300VDC rated equipment: A 300VDC appropriately rated circuit breaker must be installed.
• A circuit breaker is not required for 12, 24 or 48 VDC rated power supplies.
• For dual DC power supplies, Separate circuit breakers must be installed and separately identified.
Single Low DC Power Supply Wiring Examples
Chapter 2
Installing the Device
11
Advertisement
Table of Contents
