Table of Contents
Advertisement
No.
Part name
1. Detachment
Electric
3
parts box
1) Carry out works of Detachment of
2) Remove the power supply wire and the
3) Remove the power supply wire from cord
4) Remove screws (M4, 0.39"(10 mm), 2 pcs.))
5) Hook the hooking section temporarily at the
2. Attachment
1) Insert the square hole of the electric parts
2) Attach screws (M4, 0.39"(10 mm), 2 pcs.))
3) Connect the power supply wire and the
4) Carry out works of Attachment of
Procedure
remote control wire and control wires from
the terminal blocks.
clamp at side of the electric parts box.
of the electric parts box and pull out
downward.
rear side of the electric parts box to the
sheet fittings part of the main unit.
box into the claw of the main unit.
to the electric parts box.
remote control wire and control wires as
before.
and
.
1
2
Control wiring/Remote
control terminal block
and
.
1
2
Square hole of
electric parts box
122
Remarks
Power supply
terminal block
Cord clamp
Cord clamp
Screw
Sheeted folding up
section of main unit
Claws of main unit
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
