Table of Contents
Advertisement
Checking or Cancelling Timer Recordings
Before you begin, place the DVD/VCR in VCR mode.
Press the DVD/VCR OUTPUT button so that the VCR light
appears on the front of the DVD/VCR.
1
With the DVD/VCR on and in VCR mode and in VCR position
(press the VCR/TV button so that the VCR/TV light appears on
the front of the DVD/VCR), press the VCR button, then
press the MENU button.
2
Press the PLAY button or the STOP button to select
PROGRAM, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select
PROGRAM REVIEW, then press the F.FWD button. The
timer recording information for the program in the lowest num-
bered slot will appear on the screen. If no timer recordings are
set, nothing will happen when you press the F.FWD button.
4
Press the F.FWD button repeatedly to review all pro-
grammed timer recordings. If you don't press the F.FWD but-
ton within 10 seconds, the DVD/VCR will automatically display
information about the next programmed timer recording. This will
continue until all timer recordings have been displayed. Then the
menu will disappear.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
6
Repeat steps 1-4 to make sure you have cleared the cor-
rect timer recording.
Timer Recording (cont'd) 39
2-4
POWER
DVD/VCR
VCR/TV
DVD
REW
1
2
4
5
5
7
8
SPEED
0
SEARCH MODE
DISPLAY
TIME SEARCH
STATUS/EXIT
Helpful Hints
• CLASH may flash on the screen when
you finish setting a timer recording.
This means that the timer recording
you just programmed and another
timer recording overlap. The current
timer recording will not take place.
You may choose to cancel the over-
lapping timer recording.
• To stop a started timer recording,
press the STOP/EJECT button or the
TIMER SET button on the front of the
DVD/VCR.
• If the power fails for more than one
minute, programmed timer recordings
will be lost. If this occurs, repeat the
steps on pages 16 and 20 before
resetting the timer recordings.
• If the preset time for a timer record-
ing comes up during an OTR, the
OTR has priority. A message will
remind you when the timer recording
was scheduled to begin. You may let
the OTR continue; the timer recording
will not take place. Or, stop the OTR
and press the TIMER SET button
immediately. The timer recording will
take place if you press the TIMER
SET button before the timer record-
ing's scheduled start time.
See page 78 for more hints.
TIMER SET
OUTPUT
MEMORY
1
VCR
PLAY
F.FWD
STOP
PAUSE
3
6
SLOW
9
A B
+10
CLEAR
REPEAT
1
MENU
TITLE
ENTER
RETURN
Advertisement
Table of Contents
