Phone Setup
Do not charge the phone in a hazardous environment.
Caution
Do not charge the phone if it is wet.
Procedure
Step 1
Connect the long connecter of the USB cable to the bottom of the phone with the pins aligned.
Step 2
Plug the other end into the USB port in the computer.
Phone Configuration
Phone configuration uses one of these methods:
• Your administrator sets up the phone. When this happens, you don't need to do any configuration. Your
• You set up the phone for your Wi-Fi network and to connect to the call control system. When this
Add the Phone to the Wi-Fi Network
When you enter an IP address, scroll to the field, and press Select. The field changes from one field into input
boxes. You use the keypad to enter the digits and the navigation ring to move between the fields.
administrator may lock your access to the configuration menus.
happens, your administrator gives you the information you need to enter in the phone.
Cisco Wireless IP Phone 8821 and 8821-EX User Guide
Phone Configuration
27