Philips Pronto TSU9400 Starter Manual page 5

The Pronto System
The Pronto System contains a variety of equipment that is connected and configured to interact
with each other. The scheme below shows a possible way to connect several A/V
components.
Wireless
Access Point
Pronto
Control Panels
Multimedia
Server
Configuration of the Pronto Control Panel
To set up a Pronto System and configure the Control Panel as the central unit of the system, you
need different tools. The scheme below indicates the different tools, their significance in the
configuration of the Pronto system and their mutual connection.
Wireless Access
Point/ Router
Ethernet IP
ProntoEdit Professional
• Customize configuration file
• Assign or learn codes
• Match extenders to devices
• Set Control Panel Settings
Discovery
Tool
Download
Configure
Configuration
Tool
• Configure
Extenders Network
Settings
• Update Extenders
firmware
Ethernet IP
Lutron
light system A/V receiver
RF
Pronto Control Panels
• Set Control Panel Settings
USB cable
Crossed Ethernet
Extenders
• Set hardware switches
• Connect to A/V equipment
and/or Wireless Access
Point/Router
TSU9400 Starter's Guide
Router Pronto Serial Extender
RS-232
TV
A/V equipment
• Install and wire
the components
IR
Wired IR
Wired IR
Sensor
RS-232
Relay
Wired IR
A/V equipment
TV
2