Setting power consumption view condition
You can set the view condition for the accumulative and monthly power consumption. To set the view
condition, proceed as follows. The description uses the accumulative power consumption as the
example from here on. The view condition setting for the monthly power consumption is the same.
1
. Press the [Set option] button located on the ʻAccumulative power consumptionʼ tab. ʻCondition
settingʼ screen to set the viewing unit and target will be displayed.
2
. Set the viewing unit and target, and press the [Apply] button. For more detail on the setting item,
refer to the following table.
When y o u pres s the [Set o pti o n] butto n, the
'Co ndi ti o n s etti ng ' s creen wi l l be di s pl ay ed.
After s etti ng the co ndi ti o n, pres s the [OK] butto n.
Power consumption statistics function
Option function manual
57