Still Picture; Searching For Tape Position Without The Picture (Winding); Instant View' Function; Automatic Search For A Tape Position (Index Search) - Philips 14 PV 202 Instruction Manual

Still picture

a
Press the STILL R button. A still picture will appear on
the screen.
b
Each time you press
STILL R
move on one step.
D Interference stripes may appear on the screen
during still picture.
c
To exit the still picture, press the
Searching for tape position without the
picture (winding)
a
Stop the tape with the
b
Press the H (reverse) or
following will appear on the screen:
P01
c
To stop at the desired position, press the
button.

'Instant View' function

With this function you can switch to picture search during
wind and rewind.
a
If you hold the (rewind) or
H
during wind or rewind, you will switch to picture search.
b
When you release this button, the TV-Video Combi
automatically switches back to wind and rewind.
16
again, the picture will
button.
PLAY G
button.
STOP h
I (forward) button. The
0:01:20
STOP h
(forward) button
I
Automatic search for a tape position
(index search)
At the start of each recording, an index code is written on the
tape.
a
In order to search for the previous or next index code,
press the INDEX E button and then the
the previous code or the
The following may appear on the screen for the next
code:
b
When the TV-Video Combi finds the marker, it will
automatically switch to playback mode.

Skipping commercials automatically

With this function you can skip approx. 120 sec. blocks of
commercial time on the tape during playback.
a
During playback, press the
b
The TV-Video Combi forwards the type by 120 seconds of
commercial time and then automatically switches back to
playback.
D If the commercial is still on, you can reactivate this
function.
D If you press the button
process, the TV-Video Combi switches back to
playback.
H button for
button for the next code.
I
0:01:20
button.
PLAY G
during the winding
PLAY G