Numbering Extensions And C.o. Lines - Samsung OfficeServ 7200 Installation Manual

CHAPTER 8. Starting the System
3

Numbering Extensions and C.O. Lines

Once the OfficeServ 7200 system is booted, the MCP/LCP Module verifies the
Modules mounted on each slot and saves this information as the default
configuration of the system.
According to the setting of the S3 switch(SW6, SW7, SW8) of the MCP/LCP
Module, the OfficeServ 7200 system assigns 3 or 4 digits to C.O. lines, extensions,
and extension groups. Refer to 'Chapter 4. Mounting and Replacing Modules' of
this manual for details on setting the S3 switch.
C.O. line numbers from 701 or 7001 are sequentially assigned to the C.O. line
Module mounted on Slot 1 of the basic Chassis, and following numbers are
continuously assigned to the next C.O. line Module of the next slot. However, only
the numbers from 701 to 799 are assigned when using 3 digits. For example, if an
8TRK Module is mounted on Slot 1 and an 8TRK Module is mounted on Slot2,
701 is assigned to the C1/S1/P1 port and 712 is assigned to the C1/S2/P4 port.
(Twelfth C.O. line is assigned to the fourth port of the second slot of the first
Chassis.)
Extension numbers from 201 or 2001 are sequentially assigned to the extension
Module mounted on Slot 1 of the basic Chassis, and following numbers are
continuously assigned to the next extension Module of the next slot. This
numbering process continues until the extension numbers are assigned to all
extensions. However, only the numbers from 201 to 349 are assigned when using
3 digits.
The last port of the first 8DLI or 16DLI Module is assigned to the attendant group
as default. All C.O. lines ring this attendant extension unless the default value is
changed. Thus, a phone with an LCD panel should be connected to the last port of
the first 8DLI Module.
500-549 or 5001-5049 is assigned to an extension group.
The numbers of C.O. lines, extensions, or extension groups can be changed using
the MMC 724 program.
Page 8-4
OfficeServ 7200 Installation Manual/Ed.00
© SAMSUNG Electronics Co., Ltd.