Firmware Upgrade - Samsung SE-208BW User Manual

SE-208BW User manual
FTP / SAMBA
Configure the FTP / SAMBA server to allow a user to access, from the external through the FTP / SAMBA port, the data on a disc
inserted into the drive or a USB storage device connected to Optical Smart Hub.
1. Of the 'Enable FTP Server / Enable SAMBA Server', select the checkboxes of the items you want to enable.
2. Set the permission for the data that will be accessed.
3. For security, set the ID and password.
4. Click the Save button.
DLNA
Configure and enable the DLNA function to allow other devices equipped with the DLNA function to access the data on a disc
inserted into the drive or a USB storage device connected to Optical Smart Hub.
1. Of the 'DNLA Service' options, select 'Enable'.
2. In the 'Server Name', enter the DNLA server name that the Optical Smart Hub will use.
3. Click the Save button.
iSCSI
Configure the settings to allow other devices connected to the IP network via iSCSI to access the data on a disc inserted into the
drive or a USB storage device connected to Optical Smart Hub.
1. Of the 'iSCSI Service' options, select 'Enable'.
2. In the 'Target Name', enter the iSCSI target name that the Optical Smart Hub will use.
3. Click the Save button.
How to configure Maintenance

Firmware Upgrade

Firmware upgrade precautions
Before upgrading the firmware, make sure to remove the USB storage device connected to the Optical Smart Hub. Failing to
do so may result in damage to the data on the USB storage device during the firmware upgrade, and Samsung will
not accept liability for this.
Make sure to perform firmware upgrade from the PC which is wiredly connected to the Optical Smart Hub via a sharing
device or hub. If you perform firmware upgrade from the PC connected to the Optical Smart Hub wirelessly, the Optical Sma
may not operate due to loss of packets.
file:///N|/TSST-Project/EN/index.html[2011-11-08 오후 2:30:46]