Enabling A Device - Siemens SINUMERIK 840D Operating Manual

Easy Extend (828D only)

17.2 Enabling a device

17.2 Enabling a device
The available device options are protected by a password.
Procedure
552
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the menu forward key and then the "Easy Extend" softkey.
A list of the connected devices is displayed.
3. Press the "Enable function" softkey.
The "Enabling of the Devices Option" window is opened.
4. Enter the option code and press the "OK" softkey.
A tick appears in the appropriate checkbox in the "Function" column
and the function is enabled.
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Milling