Setting Automatic Updates For The Time And Date - Motorola MTP8500Ex User Manual

Tetra atex series
Hide thumbs Also See for MTP8500Ex:
Table of Contents

Advertisement

Available languages

Available languages

MN002033A01–AC (en-US)
Chapter 4: Main Menu
NOTICE: You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or
behind.
4 Press Done.
4.10.8.7

Setting Automatic Updates for the Time and Date

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → System Update.
3 Select one of the following:
Off — All the infrastructure information are ignored. The radio uses internal time and offset.
Time Only — Time displayed is calculated from the offset programmed by your service
provider added or subtracted from the infrastructure time.
Time & Offset — Time and offset are updated after receiving from the infrastructure.
4.10.9
Energy Economy
Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all
downlink time slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode
is not needed.
4.10.9.1
Enabling/Disabling Energy Economy
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Energy Economy → EE Selection.
3 Select one of the following:
On — Activates Energy Economy feature.
Off — Deactivates Energy Economy feature.
4.10.9.2
Viewing the Energy Economy Status
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Energy Economy → EE Status.
3 The Energy Economy status is displayed as:
Energy Ecnmy Is Supported By System
Energy Economy Is Currently Not Supported By System
110
Send Feedback

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents