Parameter
Description
BL
Blank (unmachined part) description (only for ∇)
•
•
•
XD
- (only for ∇ machining)
- (only for unmachined part description, cylinder and allowance)
•
•
ZD
- (only for ∇ machining)
- (only for unmachined part description, cylinder and allowance)
•
•
Allowance
Allowance for pre-finishing - (only for ∇∇∇)
•
•
U1
Compensation allowance in X and Z direction (inc) – (only for allowance)
•
•
Set machining area
Set machining area limits
limits
•
•
with limited machining area only, yes:
XA
XB
ZA
ZB
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Cylinder (described using XD, ZD)
Allowance (XD and ZD on the finished part contour)
Contour (additional CYCLE62 call with blank contour – e.g. cast iron mold)
For unmachined part description, cylinder
–
Version, absolute:
Cylinder dimension ∅ (abs)
–
Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
For unmachined part description, allowance
–
Allowance on the CYCLE62 finished part contour (inc)
For unmachined part description, cylinder
–
Version, absolute:
Cylinder dimension (abs)
–
Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
For unmachined part description, allowance
–
Allowance on the CYCLE62 finished part contour (inc)
Yes
U1 contour allowance
No
Positive value: Compensation allowance is kept
Negative value: Compensation allowance is removed in addition to finishing
allowance
Yes
No
1. Limit XA ∅
2. Limit XB ∅ (abs) or 2nd limit referred to XA (inc)
1. Limit ZA
2. Limit ZB (abs) or 2nd limit referred to ZA (inc)
Programming technological functions (cycles)
8.5 Contour turning - only for G code programs
Unit
mm
mm
mm
mm
423