Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Automatic Programming - Philips MC M298 Owner's Manual

Tuning to radio stations

1
Press SOURCE on the front panel of the
system repeatedly or TUNER on the remote to
select TUNER.
➜ TUNER is displayed briefly.
2
Press SOURCE on the front panel of the
system or TUNER on the remote once or
more to select your waveband (FM/AM).
3
Press and hold ALBUM -/+ à /á (à /á
on the remote).
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
4
Repeat step 3 if necessary until you find the
desired station.
●
To tune to a weak station, press ALBUM -/+
à /á (à /á on the remote) briefly and
repeatedly until you have found optimal
reception.

Radio Reception

Programming radio stations

You can store up to a total of 40 radio stations in
the memory for each band.

Automatic programming

Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden.
1
Press TITLE -/+ í / ë (ALBUM/PRESET
+/- on the remote) to select the preset number
where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROGRAM for more than 2 seconds to
activate programming.
➜ AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by AM. The last preset
automatically stored will then be played.
19