Step 3: Connecting Tv Set; Using Video In Jack (Cvbs); Using Line Out Jack(L/R); Using Component Video In Jack (Pr Pb Y) - Philips FWD185 User Manual

Connections

Step 3: Connecting TV set

ANTENNA
IMPORTANT!
– You only need to make one video
connection from the following options,
according to the capabilities of your TV
system.
– S-Video or Component Video
connection provides higher picture
quality. These options must be available
on your TV set.
– Connect the system directly to the TV
set.

Using Video In jack (CVBS)

●
Use the composite video cable (yellow) to
connect the system's VIDEO jack to the video
input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the TV set.
Using LINE OUT jack (L/R)
●
To listen to this system channels through TV , use
the audio cables (white/red) to connect LINE
OUT (L/R) jacks to the corresponding AUDIO
IN jacks on the TV set.
10
IN OUT
FM FM
MW
8
FM
MW
110-240 V~50 -60 HZ

Using component Video In jack (Pr Pb Y)

●
Use the component video cables (red/blue/
green) to connect the system's PR PB Y jacks
to the corresponding Component video input
jacks (or labeled as Pr, Pb, Y or YUV) on the TV
set.
●
To listen to this system channels through TV , use
the audio cables (white/red) to connect LINE
OUT (L/R) jacks to the corresponding AUDIO
IN jacks on the TV set.
IN OUT
8