Philips AZ 1025 Owner's Manual page 14

CASSETTE RECORDER
GENERAL INFORMATION ON RECORDING
• Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes. For recording you should use
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.
• The recording level is set automatically. Altering the VOLUME
and bass controls will not affect the recording in progress.
• At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape passes
the recorder heads.
• To protect a tape from accidental erasure have the tape in
front of you and break out the left tab. Recording on this side
is no longer possible. To record over this side again, cover the
tabs with a piece of adhesive tape.
Synchro Start CD recording
1. Adjust the CD TUNER TAPE/
2. Insert a CD and if desired, program track numbers.
3. Press STOP•OPEN 9/ to open the cassette holder.
4. Insert a blank tape and close the cassette holder.
5. Press RECORD 0 to start recording.
– Playing of the CD program starts automatically from the
beginning of the program. It is not necessary to start the CD
player separately.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording press STOP•OPEN 9/.
To select and record a particular passage
1. Press and hold down the CD SEARCH controls ∞ or § on the
set, or 5 or 6 on the remote control) to find your passage.
2. Press PLAY•PAUSE 2; to pause the CD.
3. Press RECORD 0 and recording will begin from this exact point
in the track.
Recording from the radio
1. Adjust the CD TUNER TAPE/
2. Tune to the desired radio station (See 'Tuning to radio
stations').
3. Press STOP•OPEN 9/ to open the cassette holder.
4. Insert a blank tape and close the cassette holder.
5. Press RECORD 0 to start recording.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•OPEN 9/.
14
slider to CD position.
OFF
slider to TUNER position.
OFF
1