ABB REF630 Product Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Protection Device
  5. REF630
  6. Product manual

ABB REF630 Product Manual

Feeder protection and control ref630
Hide thumbs Also See for REF630:
Table of Contents

Advertisement

Quick Links

See also: Commissioning Manual
®
Relion
630 series
Feeder Protection and Control
REF630
Product Guide

Advertisement

Table of Contents
loading

Related Manuals for ABB REF630

Summary of Contents for ABB REF630

  • Page 1 ® Relion 630 series Feeder Protection and Control REF630 Product Guide...

  • Page 2: Table Of Contents

    15. Current circuit supervision........14 Disclaimer The information in this document is subject to change without notice and should not be construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for any errors that may appear in this document.

  • Page 3: Description

    Product version: 1.0 Issued: 15.09.2009 Revision: A 1. Description 2. Application REF630 is a comprehensive feeder REF630 provides main protection for management IED for protection, control, overhead lines and cable feeders of measuring and supervision of utility and distribution networks. The IED fits both industrial distribution substations.
  • Page 4 Issued: 15.09.2009 GUID-EBE462A5-7366-467A-BA18-583E75428EDB V1 EN Figure 1. RET630 and REF630 IEDs applied for the incoming feeder and primary switchgear in a double busbar arrangement. The RET630 with preconfiguration A is used for protection and control of the power transformer, the REF630 with preconfiguration B protects and controls the outgoing feeder and the REF630 with preconfiguration D is used for the bus sectionalizer.

  • Page 5: Preconfigurations

    IED specific application, changing of the default from the ground up. parameter settings, configuration of the Table 1. REF630 preconfigurations Description Preconfiguration Preconfiguration A for open/closed ring feeder Preconfiguration B for radial overhead/mixed line feeder...
  • Page 6 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 2. Supported functions Functionality Protection Three-phase non-directional overcurrent, low stage Three-phase non-directional overcurrent, high stage Three-phase non-directional overcurrent, instantaneous stage Three-phase directional overcurrent, low stage Three-phase directional overcurrent, high stage...
  • Page 7 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 2. Supported functions, continued Functionality Distance protection Automatic switch-onto-fault logic Protection related functions Local accelerat. logic Communication logic for residual OC Scheme communic. logic Current reversal and WEI logic...

  • Page 8: Protection Functions

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 2. Supported functions, continued Functionality Residual voltage Power monitoring with P, Q, S, power factor, frequency Sequence current Sequence voltage Metering Pulse counter for energy metering Disturbance recorder function...
  • Page 9 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 protection, with three independent stages, is overvoltage protection with three used for earth-fault protection of the independent stages each, both with phase-to- substation bus and the incoming feeder, and phase or phase-to-earth measurement.
  • Page 10 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 GUID-4460293F-E493-4876-8B35-EA12DD21B7BD V1 EN Figure 3. Protection function overview of preconfiguration B...
  • Page 11 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 GUID-A0FC88A2-E407-4A57-86B8-8845CE7AD078 V1 EN Figure 4. Protection function overview of preconfiguration C GUID-CE8BEBCD-9D9B-4FE6-A9EF-AF4690339584 V1 EN Figure 5. Protection function overview of preconfiguration D...

  • Page 12: Control

    IED. The values are also accessed locally or remotely using the web-browser based 6. Fault location user interface. REF630 features an impedance-measuring fault location function suitable for locating 8. Disturbance recorder short-circuits in radial distribution systems. Earth faults can be located in effectively and low-resistance earthed networks.

  • Page 13: Event Log

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 IED control signal over a binary input can be systems once the required communication set to trigger the recording. In addition, the engineering has been done. disturbance recorder settings include pre and post triggering times.

  • Page 14: Self-Supervision

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 in its closed and in its open position. It also function calculates the sum of the phase detects loss of circuit-breaker control voltage. currents and compares the sum with the...

  • Page 15: Communication

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 fault protection and featuring a core-balance settings. The threshold voltage can be set current transformer. separately for each binary input. The three phase-voltage inputs, for either All binary input and output contacts are...
  • Page 16 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 TX) or the fibre-optic multimode LC • SNTP (Simple Network Time Protocol) connector (100BASE-FX). • DNP3 The IED supports SNTP, DNP3 and IRIG-B With special time synchronization wiring: time synchronization methods with a time- •...

  • Page 17: Technical Data

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 19. Technical data Table 6. Dimensions Description Type Value Width half 19" 220 mm Height half 19" 177 mm (4U) Depth half 19" 249.5 mm Weight half 19" box 6.2 kg (4U)
  • Page 18 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 8. Energizing inputs Description Value Rated frequency 50/60 Hz Operating range Rated frequency ± 5 Hz Current inputs Rated current, I 0.1/0.5 A 1/5 A Thermal withstand capability: •...
  • Page 19 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 10. Signal output and IRF output IRF relay change over - type signal output relay Description Value Rated voltage 250 V AC/DC Continuous contact carry Make and carry for 3.0 s 10 A Make and carry 0.5 s...
  • Page 20 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 13. Ethernet interfaces Ethernet interface Protocol Cable Data transfer rate CAT 6 S/FTP or better 100 MBits/s LAN/HMI port (X0) LAN1 (X1) TCP/IP protocol Shielded twisted pair...
  • Page 21 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 19. Environmental conditions Description Value Operating temperature range -25...+55ºC (continuous) Short-time service temperature range -40...+85ºC (<16h) Note: Degradation in MTBF and HMI performance outside the temperature range of -25...+55ºC...
  • Page 22 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 21. Electromagnetic compatibility tests Description Type test value Reference 100 kHz and 1 MHz burst IEC 61000-4-18 disturbance test IEC 60255-22-1, level 3 • Common mode 2.5 kV •...
  • Page 23 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 21. Electromagnetic compatibility tests, continued Description Type test value Reference • 1...3 s 1000 A/m • Continuous 300 A/m Power frequency immunity IEC 60255-22-7, class A test...
  • Page 24 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 22. Insulation tests Description Type test value Reference Dielectric tests: IEC 60255-5 • Test voltage 2 kV, 50 Hz, 1 min 500 V, 50 Hz, 1min, communication...
  • Page 25 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 25. EMC compliance Description Reference EMC directive 2004/108/EC Standard EN 50263 (2000) EN 60255-26 (2007) Table 26. RoHS compliance Description Complies with RoHS directive 2002/95/EC...
  • Page 26 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Protection functions Table 27. Three-phase non-directional overcurrent protection (PHxPTOC) Characteristic Value Operation accuracy At the frequency f = f PHLPTOC ±1.5% of the set value or ±0.002 x I PHHPTOC ±1.5% of set value or ±0.002 x I...
  • Page 27 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 28. Three-phase non-directional overcurrent protection (PHxPTOC) main settings Parameter Function Value (Range) Step Start Value PHLPTOC 0.05...5.00 pu 0.01 PHHPTOC 0.10...40.00 pu 0.01 PHIPTOC 0.10...40.00 pu 0.01...
  • Page 28 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 29. Three-phase directional overcurrent protection (DPHxPDOC) Characteristic Value Operation accuracy At the frequency f = f DPHLPDOC Current: ±1.5% of the set value or ±0.002 x I Voltage: ±1.5% of the set value or ±0.002 x U...
  • Page 29 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 30. Three-phase directional overcurrent protection (DPHxPDOC) main settings Parameter Function Value (Range) Step Start value DPHxPDOC 0.05...5.00 pu 0.01 Time multiplier DPHxPDOC 0.05...15.00 0.05 Operate delay time DPHxPDOC 0.04...200.00 s...
  • Page 30 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 31. Non-directional earth-fault protection (EFxPTOC) Characteristic Value Operation accuracy At the frequency f = f EFLPTOC ±1.5% of the set value or ±0.001 x I EFHPTOC ±1.5% of set value or ±0.002 x I (at currents in the range of 0.1…10 x I...
  • Page 31 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 32. Non-directional earth-fault protection (EFxPTOC) main settings Parameter Function Value (Range) Step Start value EFLPTOC 0.010...5.000 pu 0.005 EFHPTOC 0.10...40.00 pu 0.01 EFIPTOC 0.10...40.00 pu 0.01 Time multiplier EFLPTOC 0.05...15.00...
  • Page 32 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 33. Directional earth-fault protection (DEFxPDEF) Characteristic Value Operation accuracy At the frequency f = f DEFLPDEF Current: ±1.5% of the set value or ±0.002 x I Voltage ±1.5% of the set value or ±0.002 x U...
  • Page 33 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 34. Directional earth-fault protection (DEFxPDEF) main settings Parameter Function Value (Range) Step Start Value DEFLPDEF 0.010...5.000 pu 0.005 DEFHPDEF 0.10...40.00 pu 0.01 Directional mode DEFLPDEF and 1=Non-directional...
  • Page 34 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 36. Transient/intermittent earth-fault protection (INTRPTEF) main settings Parameter Function Value (Range) Step Directional mode INTRPTEF 1=Non-directional 2=Forward 3=Reverse Operate delay time INTRPTEF 0.04...1200.00 s 0.01 Voltage start value INTRPTEF 0.005...0.500 pu...
  • Page 35 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 38. Negative phase-sequence overcurrent protection (NSPTOC) main settings Parameter Function Value (Range) Step Start value NSPTOC 0.01...5.00 pu 0.01 Time multiplier NSPTOC 0.05...15.00 0.05 Operate delay time NSPTOC 0.04...200.00 s...
  • Page 36 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 40. Three-phase thermal overload (T1PTTR) main settings Parameter Function Value (Range) Step Env temperature Set T1PTTR -50...100 deg (Ambient temperature used when the AmbSens is set to Off)
  • Page 37 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 41. Phase discontinuity protection (PDNSPTOC) Characteristic Value Operation accuracy At the frequency f = f ±2% of the set value Start time Typical 15 ms Reset time <...
  • Page 38 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 44. Three-phase inrush detection (INRPHAR) main settings Parameter Function Value (Range) Step Start value (Ratio of INRPHAR 5...100 % the 2nd to the 1st harmonic leading to...
  • Page 39 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 47. Three phase undervoltage protection (PHPTUV) Characteristic Value Operation accuracy At the frequency f = f ±1.5% of the set value or ±0.002 × U = 0.9 x set Typical 24 ms (±15ms)
  • Page 40 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 49. Positive-sequence overvoltage protection (PSPTOV) Characteristic Value Operation accuracy At the frequency f = f ±1.5% of the set value or ±0.002 x U = 1.1 x set...
  • Page 41 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 51. Positive sequence undervoltage protection (PSPTUV) Characteristic Value Operation accuracy At the frequency f = f ±1.5% of the set value or ±0.002 × U = 0.9 x set Start Typical 28 ms (±15ms)
  • Page 42 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 53. Negative sequence overvoltage protection (NSPTOV) Characteristic Value Operation accuracy At the frequency f = f ±1.5% of the set value or ±0.002 × U = 1.1 x set Typical 29 ms (±15ms)
  • Page 43 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 55. Residual overvoltage protection (ROVPTOV) Characteristic Value Operation accuracy At the frequency f = f ±1.5% of the set value or ±0.002 × U = 1.1 x set Typical 27 ms (±...
  • Page 44 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 58. Frequency gradient protection (DAPFRC) main settings Parameter Function Value (Range) Step Start value DAPFRC -10.00...10.00 Hz/s 0.01 Operate delay time DAPFRC 0.120...60.000 s 0.001 Table 59. Overfrequency protection (DAPTOF)
  • Page 45 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 62. Underfrequency protection (DAPTUF) main settings Parameter Function Value (Range) Step Start value DAPTUF 35.0...64.0 Hz Operate delay time DAPTUF 0.170...60.000 s 0.001 Table 63. Load shedding (LSHDPFRQ)
  • Page 46 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 65. Fault locator (SCEFRFLO) Characteristic Value Operation accuracies At the frequency f = f Current: ±1.5% of the set value or ±0.002 × I Voltage: ±1.5% of the set value or ±0.002 × U Fault location accuracy: ±2.5% of the line...
  • Page 47 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 67. Circuit breaker failure protection (CCBRBRF) Characteristic Value Operation accuracy At the frequency f = f ±1.5% of the set value or ±0.002 × I Operate time accuracy ±1.0% of the set value or ±30 ms...
  • Page 48 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 69. Distance protection (DSTPDIS) Characteristic Value Operation accuracy At the frequency f = f Current: ±1.5% of the set value or ±0.002 x I Voltage: ±1.5% of the set value or ±0.002 x U Impedance: ±2.0% static accuracy...
  • Page 49 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 70. Distance protection (DSTPDIS) main settings Parameter Function Value (Range) Steps Phase voltage Meas DSTPDIS Accurate PP without Uo System grounding DSTPDIS High impedance Low impedance From input...
  • Page 50 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 70. Distance protection (DSTPDIS) main settings, continued Parameter Function Value (Range) Steps Gnd Str voltage GFC DSTPDIS 0.02 - 1.00 pu 0.01 Ph Prf mode Hi Z GFC DSTPDIS...
  • Page 51 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 70. Distance protection (DSTPDIS) main settings, continued Parameter Function Value (Range) Steps Op Mod PP loops Zn1 DSTPDIS Disabled Enabled PP Op delay Mod Zn1 DSTPDIS Disabled...
  • Page 52 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 72. Local acceleration logic (DSTPLAL) Characteristic Value Operation accuracy At the frequency f = f ±1.5% of the set value or ±0.002 × I Operate time accuracy ±1.0% of the set value or ±20 ms...
  • Page 53 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 76. Scheme communication logic (DSOCPSCH) Characteristic Value Operate time accuracy ±1.0% of the set value or ±20 ms Table 77. Scheme communication logic (DSOCPSCH) main settings Parameter...
  • Page 54 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 80. Current reversal and WEI logic for residual overcurrent (RCRWPSCH) Characteristic Value Operation accuracy At the frequency f = f ±1.5% of the set value or ±0.002 × U Operate time accuracy ±1.0% of the set value or ±20 ms...
  • Page 55 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 82. Operation characteristics Parameter Values (Range) Operating curve type 1=ANSI Ext. inv. 2=ANSI Very. inv. 3=ANSI Norm. inv. 4=ANSI Mod inv. 5=ANSI Def. Time 6=L.T.E. inv. 7=L.T.V. inv.
  • Page 56 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 84. Synchrocheck (SYNCRSYN) Characteristic Value Operation accuracy At the frequency f = f Voltage: ±1.0% or ±0.002 x U Frequency: ±10 mHz Phase angle ±2° Reset time <...
  • Page 57 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 87. Three-phase voltage measurement (VPPMMXU ) Characteristic Value Operation accuracy At the frequency f = f ±0.5% or ±0.002 x U (at voltages in the range of 0.01...1.15 × U Suppression of harmonics DFT: -50dB at f = n ×...
  • Page 58 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 90. Three-phase power measurement (PWRMMXU) Characteristic Value Operation accuracy At all three currents in range 0.10…1.20 x In At all three voltages in range 0.50…1.15 x U At the frequency f = f Active power and energy in range |PF| >...
  • Page 59 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 93. Energy monitoring (EPDMMTR) Characteristic Value Operation accuracy At all three currents in range 0.10…1.20 x In At all three voltages in range 0.50…1.15 x U At the frequency f = f Active power and energy in range |PF| >...
  • Page 60 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 97. Fuse failure supervision (SEQRFUF) Characteristic Value Operation accuracy At the frequency f = f Current: ±1.5% of the set value or ±0.002 × I Voltage: ±1.5% of the set value or ±0.002 × U Operate time •...

  • Page 61: Front Panel User Interface

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 programmable function buttons with LED 20. Front panel user indicators. The 15 programmable alarm LEDs interface can indicate a total of 45 alarms. The local HMI offers full front-panel user-interface...
  • Page 62 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 please refer to the 630 series Installation Manual 1MRS755958. GUID-945D3C86-A432-4C1F-927A-A208E0C1F5F6 V1 EN Figure 9. Wall mounting GUID-8E2EDADD-D709-423D-8677-E3CF75DB256F V1 EN Figure 7. Flush mounting GUID-AF1BEC0B-A9DC-4E9B-9C89-98F28B1C81DB V1 EN Figure 8. Semi-flush...

  • Page 63: Selection And Ordering Data

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 The module labels state the type and serial 22. Selection and number of each module. ordering data The order number consists of a string of codes generated from the hardware and software modules of the IED.
  • Page 64 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 The preconfiguration determines the I/O hardware and available hardware variants. Choose the digits from one of the blue preconfiguration rows below to define the correct digits for # 4-8. The example below shows preconfiguration “B”...
  • Page 65 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 S B T B A B A C B B B Z A A N A X A DESCRIPTION Communication serial Glass fibre (ST connector) Plastic fibre (snap-in connector)
  • Page 66 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 S B F B A B A C B B B Z A Z N A X A DESCRIPTION Language English and Chinese Front panel Integrated local HMI...

  • Page 67: Accessories

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 GUID-72DA4753-76AB-467D-9ACD-E3ABD42559A5 V1 EN Example code: S B F B A B A C B B B Z A Z N A X A Your ordering code: Digit (#) 10 11 12 13 14 15 16 17 18 ...

  • Page 68: Tools

    GOOSE. When the web-browser based user interface is used, the IED can be accessed either Table 102. Tools Configuration and setting tools Version PCM600 Web-browser based user interface IE 7.0 or later REF630 Connectivity Package 1.0 or later...

  • Page 69: Supported Abb Solutions

    By utilizing the Connectivity Packages the IEDs can be readily configured via the PCM600 Protection ABB’s 630 series protection and control IEDs and Control IED Manager and integrated with together with the COM600 Station the COM600 Station Automation device or the...
  • Page 70 COM600 features a web- and management systems such as browser based HMI providing a customizable MicroSCADA Pro and System 800xA. graphical display for visualizing single line Table 104. Supported ABB solutions Product Version Station Automation COM600 3.3 or later MicroSCADA Pro 9.2 SP1 or later...

  • Page 71: Terminal Diagram

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 26. Terminal diagram GUID-D5305298-BC76-4649-812A-9434571FE7BB V2 EN Figure 11. REF630 terminal diagram...
  • Page 72 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 REF630 GUID-6DCDED52-BE0B-4AC9-B909-2961E13EE234 V1 EN Figure 12. Terminal diagram option for REF630...

  • Page 73: References

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 documentation, such as technical reference 27. References manual, installation manual, operators manual, etc. The selection tool on the web page helps you find the documents by the www.abb.com/substationautomation document category and language.

  • Page 74: Functions, Codes And Symbols

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 28. Functions, codes and symbols Table 105. Functions included in REF630 Functionality IEC 61850 IEC 60617 ANSI Protection Three-phase non-directional overcurrent, PHLPTOC 3I> 51P-1 low stage Three-phase non-directional overcurrent, PHHPTOC 3I>>...
  • Page 75 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 105. Functions included in REF630, continued Functionality IEC 61850 IEC 60617 ANSI Fault locator SCEFRFLO FLOC 21FL Distance protection DSTPDIS Z< 21, 21P, 21N Automatic switch-onto-fault logic...
  • Page 76 Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 Table 105. Functions included in REF630, continued Functionality IEC 61850 IEC 60617 ANSI Measured value limit supervision MVEXP Station battery supervision SPVNZBAT U<> U<> Energy monitoring EPDMMTR Measurement...

  • Page 77: Document Revision History

    Feeder Protection and Control 1MRS756380 A REF630 Product version: 1.0 Issued: 15.09.2009 29. Document revision history Document revision/ Product version History date A/15.09.2009 First release...
  • Page 80 Contact us ABB Oy Distribution Automation P.O. Box 699 FI-65101 VAASA, Finland Phone +358 10 22 11 +358 10 22 41094 www.abb.com/substationautomation...

Table of Contents