Siemens HiPath 4000 Operating Instructions Manual page 49

Step by Step
>
Start conference?
Conference?
Conf.1-2-3
Add on to conference?
Consultation?
>
Conference?
Call pickup
>
Answer camp-on?
>
Conference?
Starting a conference from a single call
You want to set up a conference.
You receive a call.
or
p
You call another user.
:
Select and confirm.
p
Call the second user.
Announce that a conference is to be set up.
:
Confirm.
You will receive the message "1 is your position".
This question will then be displayed.
Setting up a conference from a consultation call
You are connected to one user and call a second user.
:
Confirm.
p
Call the second user. The second user answers, you an-
nounce the conference.
:
Select and confirm.
You will receive the message "1 is your position".
Setting up a conference from a waiting call
You are connected to one user and receive another call.
An alerting tone is audible. The lamp flashes. Press the
key. You are connected to the waiting caller. The other
party is placed on hold.
or service menu-controlled
Preconditions: See
A second call is shown on the display and signalled
through an alerting tone.
:
Select and confirm. You are connected to the second
caller. The other caller waits.
:
Select and confirm.
You will receive the message "1 is your position". All
members are interconnected in a conference circuit.
Making Calls – Convenience Functions
page 45
49